LG 900G Unlock solution!

LG 900G Unlock solution! 

To unlock LG 900G is not as simple as most of the sites, who sells unlock codes claim. They give you an unlock code, but don't tell you how to enter unlock code on this model. On most LG phones all you have to do is type 2945#*xxx# where xxx is your model number, for exmaple LG S310 would be 2945#*310# or on some cases 2945#*71001#. This opens hidden menu where you can input unique unlock code. But some network operators have there unique firmware pre installed which has hidden menu function disabled. That gives a problem as how to input unlock code. 
LG 900G is the same as LG GW300 (hence the image above found using different search names in google, try it) so firmware from GW300 will work on 900G since they are same phones. By flashing/installing firmware will allow you to enter hidden menu and input unlock code also will remove all the branding form phone and will look inside as if was bought de branded SIM free phone. How to do it?


First you need to flash/install firmware: 


Software needed: 


1. GSMulti (official lg software for flashing/installing firmwares)
2. MTK download settings (will enable you phone to install firmware on computer) 
3. GW300_090625.dll (file used with gsmmulti software, to correctly install firmware in 900G phone.) 
4. GW300AT-00-V10c-404-XXX-SEP-30-2009+0_TotalBin (firmware file)


Hardware needed:
1. Phone (LG900G)
2. Standard Micro USB cable which normally comes with a phone, or any other phone. 


Look for links below to these files.


Step 1. 
Install GSMmulti in to your PC 
Step 2. 
Than install MTK download settings
Step 3. 
Install USB drivers. The Infinion USB driver and TI_Neptune drivers. Both drivers can be found in instalion folder of GSMulti tool ( default installion directory: go to My Computer > C: drive > GSMULTI > UsbDrivers) 
Step 4. 
Copy the firmware to GSMulti folder as well as GW300_090625.dll file
Step 5. 
Restart your computer
Step 6. 
Take the battery out of your phone plug your usb cable into your phone but NOT the computer
Launch USBMAP and select infinion at the top of a program window, press mapping start button and plug usb cable to the computer.  When usbmap finds your phone "press save and exit" button
Step 7. 
Unplug usb cable form computer
Run GSMulti, go into configuration and select the Dll file and FLS files that are in the folder and select USB in port information and select ok
Step 8. 
Click on start button, now flashing/installing firmware should start


Finally 
Power your phone on without SIM and type 2945#*71001# and enter inlock codes.




Where to find unlock codes, you can buy them online or go to my facebook page at facebook.com/4fonecom and ask me there, I will give you one for FREE! 


Link to the software: 

Click here, to download files